Dixie Cable Tech logo
All articles

Luxury Lighting Solutions

Why Your Recessed Lights Have Gaps (And How to Fix It)

St. George, Utah
Exploded view of a premium recessed light showing the solid-arm housing, LED light module and metal trim

Take a close look at the recessed lights in your ceiling. Do you see a dark ring or a gap where the round trim meets the drywall?

You are not alone. That shadow is called a recessed lights trim gap, and it shows up in a lot of newer homes across St. George and Southern Utah. Most homeowners assume the drywall or paint was done poorly. In reality, the biggest culprit is hidden above the ceiling.

The real culprit: cheap builder cans

During construction, recessed cans are installed in the ceiling with metal mounting arms. On many builder-grade cans those arms are thin and have too much flex.

When the light fixture is pushed up into the can, the can flexes up with it. Because the can moves away from the pressure, the trim can't be pulled all the way flush with the ceiling, and you're left with a gap.

The only way to prevent that with those cans would be to have someone in the attic holding the can down while the fixture is installed from below. Nobody is going to do that, so the gap stays.

How we eliminate trim gaps

New construction: our solid-arm cans

Our system really shines in new construction, when your electrician installs our cans from the start. Their arms are completely solid, so the can doesn't flex when the light module goes in. The trim sits flush against the ceiling, and the trim gap is eliminated.

Remodels: better modules and trims

Already have cans in the ceiling? Our light modules and trims are designed to sit better in the can, which can reduce or completely eliminate trim gaps on a remodel without tearing out drywall.

Metal trims instead of cheap plastic

Many builder lights use cheap-looking plastic trims. Ours are high-quality metal trims with a premium finish, so the part of the light you actually see looks as good as the rest of your home.

DMF premium black metal recessed light trim sitting flush against a ceiling

High CRI: see your home's true colors

CRI (Color Rendering Index) describes how accurately a light shows colors compared to natural light. Typical builder lights tend to make wood floors, stone counters, paint and skin tones look flat or dull.

Our lights have a higher CRI than what builders typically install, so your cabinets, tile, artwork and finishes look the way they were meant to.

Living room lit by high-CRI recessed lights showing true artwork and wood colors

A 10-year warranty, and no bulbs to change

Our light modules are UL rated and warrantied for 10 years. That rating comes from testing that shows they will last about 10 years even if they are left on 24 hours a day, seven days a week.

That means you shouldn't have to think about changing a light for at least a decade. If a module does burn out within 10 years, just call us and we will come replace it for free. After that, it's as simple as having us come out and swap the module.

Upgrade your lighting in Southern Utah

Whether you're building a new home or tired of the gaps in your current one, we install premium lighting from St. George to Cedar City, Kanab and Mesquite.

See our Luxury Lighting Solutions, or call Dixie Cable Tech at (435) 817-4469 for an in-home lighting consultation.

lighting · recessed lighting · trim gap · CRI

Need help with this?

Our Luxury Lighting Solutions service in St. George & Southern Utah

Free consultation

Ready for a smarter home?

Tell us what you're dreaming up — a theater, better WiFi, a few mounted TVs — and we'll get back to you with honest advice and a clear quote.

Let's talk about your project

Leave your info and we'll get back to you.